; GSD-Datei fuer Tool Temp MP988 Regler
; -------------------------------------
; Anbindung als DP-Slave
;
; last Revision: 19.06.09
; 

#Profibus_DP
GSD_Revision        = 1  							;19.05.2005
;
Vendor_Name         = "Tool Temp AG"
Model_Name          = "TT MP988"
Revision            = "V1.2"
Ident_Number			 = 0x0ABC
Protocol_Ident      = 0      					;Profibus DP
Station_Type        = 0      					;DP-Slave
FMS_supp            = 0
Hardware_Release    = "Revision B"
Software_Release    = "102"
;
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 0
6M_supp             = 0
12M_supp            = 0
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2      ;TTL
24V_Pins            = 0
Implementation_Type = "Asic"
Bitmap_Device       = "TT_A1"
;
Freeze_Mode_supp    = 0
Sync_Mode_supp      = 0
Auto_Baud_supp      = 0
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 10
;
Modular_Station     = 1
Max_Module          = 1
Max_Input_Len       = 244
Max_Output_Len      = 244
Max_Data_Len        = 432
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 5     								;Controller
Max_Diag_Data_Len   = 10
;
;
Module="MP988 - IO"\ 
	0xE0,\				; IN:  Modus 		(INT16)			
	0xE0,\				; IN:  Target 		(INT16, 1/10 Deg. Celsius)			
	0xD0,\				; OUT:  Status (INT16, 1/10 Deg. Celsius)
	0xD0,\				; OUT:  Cur_Temp (INT16, 1/10 Deg. Celsius)
	0xD0,\				; OUT:  Cur_Flow (INT16, 1/10 l/min)
	0xD0,\				; OUT:  Cur_Out  (INT16, %)
	0xD0					; OUT:  Cur_Alarm(INT16)
EndModule
; End of GSD